|
Depending on the condition of
your pontoons, the issues associated with your
area and/or your desired results, you may only
need to complete one or two of the following
steps.
STEP 1: Remove Build-Up
Product:
Bio-Kleen Hull & Fiberglass Cleaner
Materials:
Medium Bristle Brush, Water Hose
Directions: Spray Bio-Kleen Hull &
Fiberglass Cleaner
on surface, let stand 5 minutes, agitate with
brush and rinse thoroughly. For heavy deposits,
a longer dwell time or a second application is
recommended. Hot water always increases
efficiency.
STEP 2: Clean and De-Oxidize
Metal
Product:
Bio-Kleen Aluma-Kleen
Materials: Water Hose or Dry Soft Cloth
Directions: Now that the build-up has
been removed, the Bio-Kleen Aluma-Kleen can
reach the surface of the pontoons to clean,
de-oxidize and remove stains and discoloration.
Spray Bio-Kleen Aluma-Kleen onto surface, let
stand 60 seconds to 5 minutes (depending on
severity of oxidation), product will foam up,
then rinse off or wipe off with a soft, dry
cloth.
STEP 3: Polish and Create a
Brilliant Shine
Product:
Bio-Kleen Renew
Materials: (2) Clean, Dry Cloths or
Micro-Fiber
Directions: Dab Bio-Kleen Renew onto a
clean, dry cloth. Rub onto a dry surface
vigorously until polish turns black. Buff off
with an additional clean, dry cloth. NOTE: This
product may be used with a buffing/orbital
machine. Use a non-absorbent, thin pad for
application and a buffing pad for
removal/buffing.
NOTE: For easy cleaning on your pontoon,
boat or RV. Try
Bio-Kleen Black Streak Remover.
|
Shopping cart
