|
Automotive Detailing
Step4
Before
polishing it is a good idea to first clean your
paint. This doesn’t mean just washing your car;
it means removing oxidation and contaminants and
smoothing out the surface of the paint. No
matter how much you wash and maintain your
vehicle there are still contaminants implanted
in your paint finish that need to be eliminated.
Using
Bio-Kleen Professional Correct-It Clay prior
to waxing or polishing will leave behind an
extra smooth surface that will help waxes and
sealants stick and remain longer. This is a very
simple process that requires no buffing and very
little time. Simply mist
Bio-Kleen Professional Qwik Shine onto clay
and the surface to be corrected and place the
clay in the palm of your hand. Allow the clay to
glide over the surface, removing particles.
Knead clay after each section and repeat over
entire surface. Combined with
Bio-Kleen Professional Qwik Shine, this
system will give the finish a shine while adding
a micro-layer of polymer protection. This will
create an anti-static surface deterring water,
dust, dirt, airborne pollutants and stains.
After
removing all contaminants and creating an extra
smooth paint surface, it is time polish and
protect. It is significantly wiser to have
ultraviolet rays, ozone, acid rain, tree sap,
insects, bird hits, road tar, and all the other
road hazards attack a coat of polish than attack
your paint. By using
Bio-Kleen Professional Polish & Sealant the
finish of your automobile will have a high gloss
shine and a long lasting, protective shield
against all of those road hazards. Apply to the
windshield or windows and rain beads up and
rolls off for an ultimate clear view.
Incorporated polymers create and retain the
hard, high gloss surface sealing the moisture
out. Apply
Bio-Kleen Professional Polish & Sealant with
a slightly dampened cloth or
applicator, we recommend dampening
applicator first
with Bio-Kleen Professional Qwik Shine.
Apply sparingly (a little goes a long way)
and evenly by hand or orbital using overlapping
circular motions. Your paint will only accept a
certain amount of polish and when you apply more
than that it is just removed during buffing.
After applying, let dry to a haze. Buff a small
section with a clean, dry, soft cloth to a
brilliant-high gloss; shake out the cloth to
remove any access and continue. A change of
cloths may also be needed if cloth has been used
repeatedly. When the car has been completed,
examine the vehicle from an angle to check for
any water spots or polish residue; if any
remain, rebuff with another clean cloth and
Bio-Kleen Professional Qwik Shine.
Bio-Kleen Professional Qwik Shine is also a
great way to keep your vehicle brilliant looking
in between washing and polishing.
Bio-Kleen Professional Qwik Shine is a
spray-on, wipe-off formula that cleans and
shines giving you all of the gloss and
protection of a polish in a fraction of the
time. You can safely remove dust, smudges,
fingerprints, bird hits, rain film and water
spots. Just mist
Bio-Kleen Professional Qwik Shine on cool,
dry finish and buff lightly with a soft cloth.
The next day after polishing it is also a good
idea to clean your windows with a glass cleaner
to removing any access.
TIP: All cloths should be washed
using only detergent. Do not add any fabric
softener to the water or dryer sheets to the
dryer. These contain coatings that are
transferred to your car cloths and may cause
streaks.
|
Shopping cart
