|
Automotive Detailing
Step5
It is
important to protect your rubber and vinyl from
harmful ozone, Ultra Violet light rays and
oxygen destruction that will crack and discolor
these materials. But before you protect, you
need to clean. Cleaning will ensure that no
stains are set in and the protectant used will
adhere better to the surface and last longer.
To
clean vinyl, first wipe off dust with a damp
towel and dilute
Bio-Kleen Professional Car Kleen 16oz per
gallon of cold water. Spray on the surface and
wipe clean. For major severity dip a soft
bristle brush into cold water and scrub in a
circular motion (if there is a nasty stain try
to not let it spread) until product foams up and
lifts stain, then wipe clean.
To
clean leather dilute
Bio-Kleen Professional Car Kleen 6oz per one
gallon cold water, test on a small area first,
then follow directions for cleaning vinyl. One
frequent problem seen is wax or polish residue
stains the exterior rubber or vinyl trim. To
remove these stains spray a small amount of
Bio-Kleen Professional Car Kleen onto a
cloth or towel, using your index finger, wipe
clean.
To
clean carpet and upholstery dilute
Bio-Kleen Professional Car Kleen 12oz per
gallon of cold water. Spray on the surface, dip
a soft bristle brush into cold water and scrub
in a circular motion (if there is a nasty stain
try to not let it spread) until product foams up
and lifts stain. Blot out access with towel and
vacuum dry.
TIP: Apply Bio-Kleen
Professional Protect It! to your trim before
you polish to help reduce residue and give it
that extra shine. This will assist in keeping
the polish from adhering to the trim and make it
easier to remove if it does happen to stick.
Spray a small amount onto a towel, using your
index finger, carefully wipe your trim to
prevent overspray and runs.
After
cleaning your rubber and vinyl apply a coating
of
Bio-Kleen Professional Protect It! to
protect and beautify. To apply, spray onto a
cloth to prevent overspray onto glass, which may
cause smearing. Wipe onto surface evenly,
allowing to penetrate thoroughly, buffing
lightly. For protecting tires, spray in a
sweeping motion over surface covering entirely
and allow to dry. In addition to protecting from
harmful ozone, Ultra Violet light rays and
oxygen destruction,
Bio-Kleen Professional Protect It! will also
create an anti-static, micro-thin layer that
will deter water, dust, dirt, airborne
pollutants and stains. This will prolong the
time in between cleaning and will also make it
easier to clean the next time. Use on tires,
bumper guards, dash boards, vinyl/leather seats
and vinyl tops.
TIP: If you enjoy a matt or more
natural appearance instead of a high gloss shiny
look; use
Bio-Kleen Professional Qwik Shine to protect
your leather and vinyl. Some people also prefer
this method for shining and protecting items
such as their steering wheel and gear shifter.
|
Shopping cart
