Home > Biokleen > Boat Cleaning >
Bio-Kleen Restore & Shine 32oz
Bio-Kleen Restore & Shine
Item #:
Availability: In Stock
Usually ships In 1-2 Business Days
Fiberglass & Paint Restoration Compound
- One Step Liquid Compound & Polish in One
- Restores Color in Faded Fiberglass
- 250 degree F UVA/UVB Protection
- Removes Swirl Marks & Light Oxidation
- Contains No Silicone
- VOC Compliant
|
Biokleen Restore & Shine is a is a fiberglass and paint restoration compound and polish in one.
- Restores color in faded fiberglass.
- Removes swirl marks and light oxidation.
- Restore - Polish - Seal all in a one step application.
- Leaves surface with a brilliant, high gloss shine.
- Advanced Particle Nanotechnology provides broader coverage and adheres better than conventional compounds and polishes; providing easier application, tougher 250OF UVA/UVB protection and longer lasting results.
- Safe on all OEM paints, clear coat or single stage paint, gel coat, with wool or foam pads.
- Body shop safe and VOC compliant. Contains no silicone.
Special Attributes
- 100% of the packaging is recyclable
- No Animal Testing - No Animal Ingredients
For extremely oxidized surfaces, first apply Bio-Kleen Restore & Shine Xtra Cut.
A Wool Compounding Pad or Double Sided Wool Compounding Pad is recommended to apply this product.
If you're simply looking for an excellent wax polish and the surface does not need restoration try Bio-Kleen Polish & Sealant.
Surface may need to be cleaned first with Bio-Kleen Super Suds and allowed to dry completely.
DIRECTIONS: Shake container well before and during use. For best results use a foam polishing pad on a buffing wheel. Apply compound on foam pad. Before turning buffer power on, slide pad around on a 12’ to 18’ area. Use buffing wheel at 1000 to 1500 rpm. Buff area using light to medium pressure while wet; reduce pressure as compound begins to dry. Work the buffer back and forth, then up and down. Buff until surface is restored and polished. Repeat over entire surface.
NOTE: For severe oxidation an application of Bio-Kleen Restore & Shine Xtra Cut may be required.
This is a demonstration video that shows how Bio-Kleen Restore & Shine and Bio-Kleen Restore & Shine Xtra Cut can be used to restore boat fiberglass in one to two easy steps.
How do you restore boat fiberglass that is severely oxidized without wetsanding? With Bio-Kleen Restore
& Shine. Restore paint, remove oxidation, remove swirl marks, restore color and repair damaged boat fiberglass gel coat in one to two easy steps. This product is used by professionals at marinas and marine detailing businesses but is also easy enough to use right at home.
This video was taken at Village Marina on Lake of the Ozarks, MO. They were impressed with how easy the product worked and how much time they could save while restoring a fiberglass boat. The Bio-Kleen Restore
& Shine allowed them to work the damaged fiberglass without drying out as other compounds do. They were also confident using this product cuts out several steps from the process and helps save money. Not only does the Bio-Kleen Restore
& Shine buff out oxidation, light scratches and swirl marks, but it polishes and seals the surface at the same time; leaving the fiberglass with a high gloss protective barrier and shine. See the difference of before and after in the video.